ElpiAutoWheel fitment · Toyota
Toyota Tacoma — Bolt Pattern
6×139.7 on 4WD and PreRunner Tacomas since 1995, and on every Tacoma (2WD included) from 2016 on. Base 2WD trims from 1995–2015 instead ran a smaller, car-derived 5×114.3 pattern — 67.1 mm hub through 2004, 60.1 mm hub from 2005–2015. The 2024+ generation kept the 6×139.7 pattern but shrank the hub to 95.1 mm and moved to a thicker M14×1.5 stud from the older M12×1.5.
✓ Reviewed 2026-09-22
Wheel size OE 5J×14 ET34 · up to 6J×14 ET38 (US-spec)
Base 2WD/RWD trims only — 4WD and PreRunner used the 6x139.7 pattern below.
Wheel size OE 6J×15 ET34 (US-spec, limited data)
Base 2WD/RWD trims only — 4WD and PreRunner used the 6x139.7 pattern below.
Wheel size OE 6J×15 ET10 · up to 8J×18 ET30 (US-spec, wide by year)
Wheel size OE 7J×17 ET60 · up to 7.5J×18 ET55 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Toyota Tacoma is 6×139.7, 95.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Toyota Tacoma have?
6×139.7 on 4WD and PreRunner Tacomas since 1995, and on every Tacoma (2WD included) from 2016 on. Base 2WD trims from 1995–2015 instead ran a smaller, car-derived 5×114.3 pattern — 67.1 mm hub through 2004, 60.1 mm hub from 2005–2015. The 2024+ generation kept the 6×139.7 pattern but shrank the hub to 95.1 mm and moved to a thicker M14×1.5 stud from the older M12×1.5. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Tacoma?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Tacoma?
95.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.