ElpiAutoWheel fitment · Ford
Ford Escape — Bolt Pattern
The first two Escape generations (2001-2012) ran 5×114.3 on a 67.1 mm hub; the C520-platform III and IV (2013 on) switched to 5×108 on a 63.4 mm hub — the same fitment as the Ford Kuga it's mechanically related to outside North America. Thread stayed M12×1.5 throughout.
✓ Reviewed 2026-09-22
Wheel size OE 6J×15 ET40 · up to 7J×16 ET45 (US-spec)
Wheel size OE 7.5J×16 ET40 · up to 8J×18 ET60 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Ford Escape is 5×108, 63.4 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Ford Escape have?
The first two Escape generations (2001-2012) ran 5×114.3 on a 67.1 mm hub; the C520-platform III and IV (2013 on) switched to 5×108 on a 63.4 mm hub — the same fitment as the Ford Kuga it's mechanically related to outside North America. Thread stayed M12×1.5 throughout. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Escape?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Escape?
63.4 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.