ElpiAutoWheel fitment · Toyota
Toyota 4Runner — Bolt Pattern
Every 4Runner generation from 1989 through the current-shape V held 6×139.7 on a large 106.1 mm hub with M12×1.5 nuts; the new TNGA-F-platform VI (2024 on, shared with Tacoma/Land Cruiser Prado) keeps the same bolt circle but shrinks the hub to 95.1 mm and moves to M14×1.5.
✓ Reviewed 2026-09-13
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Toyota 4Runner is 6×139.7, 95.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Toyota 4Runner have?
Every 4Runner generation from 1989 through the current-shape V held 6×139.7 on a large 106.1 mm hub with M12×1.5 nuts; the new TNGA-F-platform VI (2024 on, shared with Tacoma/Land Cruiser Prado) keeps the same bolt circle but shrinks the hub to 95.1 mm and moves to M14×1.5. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my 4Runner?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a 4Runner?
95.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.