ElpiAutoWheel fitment · Toyota
Toyota Land Cruiser Prado — Bolt Pattern
The 90 through 150 Series (1996–2024) share the standard Toyota truck fitment — 6×139.7 on a 106.1 mm hub, same as the Hilux. The all-new 250 Series (2023 on) keeps the same bolt pattern but shrinks the hub to 95.1 mm and moves to a coarser M14×1.5 thread.
✓ Reviewed 2026-09-12
Wheel size OE 6Jx17 ET50 up to 7.5Jx18 ET30
Wheel size OE 7Jx18 ET70
Same PCD as every earlier Prado, but the hub shrank and the thread went coarser — a 150 Series wheel needs new hardware and spigot rings to fit a 250.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Toyota Land Cruiser Prado is 6×139.7, 95.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Toyota Land Cruiser Prado have?
The 90 through 150 Series (1996–2024) share the standard Toyota truck fitment — 6×139.7 on a 106.1 mm hub, same as the Hilux. The all-new 250 Series (2023 on) keeps the same bolt pattern but shrinks the hub to 95.1 mm and moves to a coarser M14×1.5 thread. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Land Cruiser Prado?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Land Cruiser Prado?
95.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.