ElpiAuto

Wheel fitment · Toyota

Toyota Hilux — Bolt Pattern

The modern Hilux (VII and VIII, 2005 on) is 6×139.7 on 4WD and PreRunner trims — the standard Toyota truck fitment, same as the Land Cruiser Prado of the same era — with a 106.1 mm hub and M12×1.5 nuts. Base 2WD (RWD) versions use a smaller, car-derived 5×114.3 pattern on a 60.1 mm hub instead — same nut thread, different everything else.

✓ Reviewed 2026-09-12

VII–VIII 2WD2005–now
Bolt pattern5x114.3Centre bore (DIA)60.1 mmThreadM12x1.5

Base 2WD/RWD trims use this smaller, car-derived pattern — not interchangeable with the 4WD/PreRunner pattern below.

VII–VIII 4WD/PreRunner2005–now
Bolt pattern6x139.7Centre bore (DIA)106.1 mmThreadM12x1.5

Wheel size OE 7Jx15 ET30 up to 7.5Jx18 ET30

Trims and markets vary — verify against your own wheel or the owner's handbook before buying.

Will a wheel fit?

This Toyota Hilux is 6×139.7, 106.1 mm hub.

The wheel you are checking
×

Don't know the wheel's own pattern? Measure it →

Loading…
Useful? Share it with someone who's picking tires or wheels.

More tire calculators

Tire Size CalculatorDecode one size, see what else fits the wheelTire Size ComparisonTwo sizes side by side, with the speedometer effectTire Size ConverterWrite any size in metric or inch notationWheel Offset CalculatorPoke, strut clearance and backspacing for a new wheelTire Pressure Converterpsi, kPa and bar — with a placard chartFuel Cost CalculatorTrip cost and consumption in mpg, L/100km, km/LSpeedometer Error CalculatorHow far off the dial reads after a tire size changeTire Stretch CalculatorHow stretched a tire sits on a given wheel width

Common questions

What bolt pattern does the Toyota Hilux have?

The modern Hilux (VII and VIII, 2005 on) is 6×139.7 on 4WD and PreRunner trims — the standard Toyota truck fitment, same as the Land Cruiser Prado of the same era — with a 106.1 mm hub and M12×1.5 nuts. Base 2WD (RWD) versions use a smaller, car-derived 5×114.3 pattern on a 60.1 mm hub instead — same nut thread, different everything else. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.

Will other wheels fit my Hilux?

Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.

What is the centre bore on a Hilux?

106.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.

Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.