ElpiAutoWheel fitment · Toyota
Toyota C-HR — Bolt Pattern
Both C-HR generations share 5×114.3, a 60.1 mm hub and M12×1.5 lug nuts — the newer AX20 (2023 on) just runs a lower factory offset (ET30–35) than the original AX10 (ET45–50).
✓ Reviewed 2026-09-12
Wheel size OE 6.5Jx17 ET30-45 up to 7Jx19 ET35
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Toyota C-HR is 5×114.3, 60.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Toyota C-HR have?
Both C-HR generations share 5×114.3, a 60.1 mm hub and M12×1.5 lug nuts — the newer AX20 (2023 on) just runs a lower factory offset (ET30–35) than the original AX10 (ET45–50). Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my C-HR?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a C-HR?
60.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.