ElpiAutoWheel fitment · Acura
A Acura MDX — Bolt Pattern
The MDX has alternated bolt pattern by generation: 5×114.3 on the YD1 (2001-2006) and YD3 (2014-2016), but 5×120 on the YD2 (2007-2013) and YD4/YD5 (2017-present) — always with a 64.1 mm hub and M12×1.5 bolts.
✓ Reviewed 2026-09-18
Wheel size OE 6.5J×17 ET45 (US-spec, limited data)
Wheel size OE 8J×18 ET45 · up to 8.5J×19 ET45 (US-spec)
Wheel size OE 8J×18 ET55 · up to 8J×19 ET55 (US-spec)
Wheel size OE 8J×18 ET55 · up to 8J×20 ET55 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Acura MDX is 5×120, 64.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Acura MDX have?
The MDX has alternated bolt pattern by generation: 5×114.3 on the YD1 (2001-2006) and YD3 (2014-2016), but 5×120 on the YD2 (2007-2013) and YD4/YD5 (2017-present) — always with a 64.1 mm hub and M12×1.5 bolts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my MDX?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a MDX?
64.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.