ElpiAutoWheel fitment · BYD
B BYD Atto 3 — Bolt Pattern
The BYD Atto 3 (Yuan Plus) electric crossover is 5×114.3 with a 60.1 mm hub and M12×1.5 cone-seat bolts.
✓ Reviewed 2026-09-18
Fitment cross-checked from aftermarket wheel-fitment databases — confirm against your wheel stamp before buying.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This BYD Atto 3 is 5×114.3, 60.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the BYD Atto 3 have?
The BYD Atto 3 (Yuan Plus) electric crossover is 5×114.3 with a 60.1 mm hub and M12×1.5 cone-seat bolts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Atto 3?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Atto 3?
60.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.