ElpiAutoWheel fitment · Toyota
Toyota RAV4 — Bolt Pattern
Remarkably stable: every RAV4 generation from the original 1994 XA10 to the current XA60 is 5×114.3 with a 60.1 mm hub and M12×1.5 lug nuts — Toyota uses nuts on a fixed stud, not bolts.
✓ Reviewed 2026-09-12
Wheel size OE 6.5J×16 ET45 (early) up to 7.5J×20 ET40 (current)
Lug nuts on studs, not bolts — unlike the VW/BMW cars in this list. Checked across all six generations (XA10, XA20, XA30, XA40, XA50, XA60): PCD, bore and thread never changed.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Toyota RAV4 is 5×114.3, 60.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Toyota RAV4 have?
Remarkably stable: every RAV4 generation from the original 1994 XA10 to the current XA60 is 5×114.3 with a 60.1 mm hub and M12×1.5 lug nuts — Toyota uses nuts on a fixed stud, not bolts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my RAV4?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a RAV4?
60.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.