ElpiAutoWheel fitment · Ford
Ford Edge — Bolt Pattern
The first-generation Edge (2006-2014) used 5×114.3 on imperial 1/2"-20 UNF studs and a large 70.5 mm hub; the second generation (2015-2024) switched to the smaller global CD4 fitment, 5×108 on a 63.4 mm hub with M14×1.5 studs.
✓ Reviewed 2026-09-22
Wheel size OE 7.5J×17 ET40 · up to 9J×22 ET39 (US-spec)
Wheel size OE 8J×18 ET52 · up to 8.5J×21 ET52 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Ford Edge is 5×108, 63.4 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Ford Edge have?
The first-generation Edge (2006-2014) used 5×114.3 on imperial 1/2"-20 UNF studs and a large 70.5 mm hub; the second generation (2015-2024) switched to the smaller global CD4 fitment, 5×108 on a 63.4 mm hub with M14×1.5 studs. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Edge?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Edge?
63.4 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.