ElpiAutoWheel fitment · Toyota
Toyota Tundra — Bolt Pattern
The 1st-gen Tundra (2000–2006) is 6×139.7 — the same as a Tacoma. The 2nd gen (2007–2021) switched to a unique 5×150 pattern with a 110 mm hub. The 3rd gen (2022+) went back to 6×139.7, aligning with the Tacoma/4Runner again.
✓ Reviewed 2026-09-18
Not interchangeable with any 6-lug Toyota truck, or with GM/Ford 6-lug trucks.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Toyota Tundra is 6×139.7, 106.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Toyota Tundra have?
The 1st-gen Tundra (2000–2006) is 6×139.7 — the same as a Tacoma. The 2nd gen (2007–2021) switched to a unique 5×150 pattern with a 110 mm hub. The 3rd gen (2022+) went back to 6×139.7, aligning with the Tacoma/4Runner again. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Tundra?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Tundra?
106.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.