ElpiAutoWheel fitment · Renault
Renault Clio — Bolt Pattern
The Clio has changed bolt pattern three times: 4×100 on the original I/II (1990–2005), 5×108 on the III/IV (2005–2019), then back to 4×100 on the current V (2019 on) — all three eras share a 60.1 mm hub.
✓ Reviewed 2026-09-12
Renault Sport (RS) trims of this era used a different 5x114.3 pattern — check separately if you have an RS.
Wheel size OE 6Jx15 ET26 up to 7Jx17 ET47
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Renault Clio is 4×100, 60.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Renault Clio have?
The Clio has changed bolt pattern three times: 4×100 on the original I/II (1990–2005), 5×108 on the III/IV (2005–2019), then back to 4×100 on the current V (2019 on) — all three eras share a 60.1 mm hub. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Clio?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Clio?
60.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.