ElpiAutoWheel fitment · Nissan
Nissan Note — Bolt Pattern
The Note has stayed on 4×100 with a 60.1 mm hub across all three generations, with two small changes along the way: the thread went from M12×1.5 to the finer M12×1.25 at the E12 (2012), and the current E13 (Japan/China market — the Note left Europe after the E12) switched from bolts to lug nuts.
✓ Reviewed 2026-09-12
Wheel size OE 5.5Jx15 ET50
Sold in Japan and China, not Europe.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Nissan Note is 4×100, 60.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Nissan Note have?
The Note has stayed on 4×100 with a 60.1 mm hub across all three generations, with two small changes along the way: the thread went from M12×1.5 to the finer M12×1.25 at the E12 (2012), and the current E13 (Japan/China market — the Note left Europe after the E12) switched from bolts to lug nuts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Note?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Note?
60.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.