ElpiAutoWheel fitment · Dacia
D Dacia Sandero — Bolt Pattern
Every Sandero generation, 2008 to now, is 4×100 with a 60.1 mm hub and M12×1.5 wheel bolts. Unlike its CMF-B platform-mate the Renault Captur, which jumped to 5×114.3 at its most recent generation, the smaller/cheaper Sandero kept the same fitment throughout.
✓ Reviewed 2026-09-12
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Dacia Sandero is 4×100, 60.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Dacia Sandero have?
Every Sandero generation, 2008 to now, is 4×100 with a 60.1 mm hub and M12×1.5 wheel bolts. Unlike its CMF-B platform-mate the Renault Captur, which jumped to 5×114.3 at its most recent generation, the smaller/cheaper Sandero kept the same fitment throughout. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Sandero?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Sandero?
60.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.