ElpiAutoWheel fitment · Nissan
Nissan Micra — Bolt Pattern
Every Micra is 4×100 with M12×1.5 nuts, but the hub grew slightly after the first generation: K11 (1992–2002) is 59.1 mm, K12 through K14 (2002 on) is 60.1 mm.
✓ Reviewed 2026-09-12
Wheel size OE 5.5Jx14 ET45 up to 6.5Jx17 ET55
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Nissan Micra is 4×100, 60.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Nissan Micra have?
Every Micra is 4×100 with M12×1.5 nuts, but the hub grew slightly after the first generation: K11 (1992–2002) is 59.1 mm, K12 through K14 (2002 on) is 60.1 mm. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Micra?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Micra?
60.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.