ElpiAutoWheel fitment · Nissan
Nissan Versa — Bolt Pattern
The first-generation Versa (2007-2012) used 4×114.3 on a 66.1 mm hub; every generation since (2012 on) shrank to 4×100 on a smaller 60.1 mm hub, with the M12×1.25 thread unchanged throughout.
✓ Reviewed 2026-09-13
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Nissan Versa is 4×100, 60.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Nissan Versa have?
The first-generation Versa (2007-2012) used 4×114.3 on a 66.1 mm hub; every generation since (2012 on) shrank to 4×100 on a smaller 60.1 mm hub, with the M12×1.25 thread unchanged throughout. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Versa?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Versa?
60.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.