ElpiAutoWheel fitment · Ford
Ford Mondeo — Bolt Pattern
The Mk1/Mk2 Mondeo (1993–2000) is 4×108, the same as the Fiesta/Focus of that era. The Mk3 through Mk5 (2000–2022) moved to 5×108 — both eras share the 63.4 mm hub and M12×1.5 nuts.
✓ Reviewed 2026-09-12
Wheel size OE 6Jx15 ET45 up to 7.5Jx18 ET50
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Ford Mondeo is 5×108, 63.4 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Ford Mondeo have?
The Mk1/Mk2 Mondeo (1993–2000) is 4×108, the same as the Fiesta/Focus of that era. The Mk3 through Mk5 (2000–2022) moved to 5×108 — both eras share the 63.4 mm hub and M12×1.5 nuts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Mondeo?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Mondeo?
63.4 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.