ElpiAutoWheel fitment · Ford
Ford Focus — Bolt Pattern
The Mk1 Focus is 4×108. The Mk2 (2004–2011) is mostly 4×108 too, with 5×108 on the ST/RS and later cars; every Mk3 (2011) onward is 5×108. Hub bore is 63.4 mm throughout.
✓ Reviewed 2026-09-22
Wheel size OE 6J×13 ET52 · up to 6.5J×15 ET37 (US-spec)
Wheel size OE 5.5J×14 ET47 · up to 6J×15 ET62 (US-spec)
ST, RS and late Mk2.5 cars are 5x108.
Wheel size OE 5.5J×14 ET36 · up to 8J×18 ET55 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Ford Focus is 5×108, 63.4 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Ford Focus have?
The Mk1 Focus is 4×108. The Mk2 (2004–2011) is mostly 4×108 too, with 5×108 on the ST/RS and later cars; every Mk3 (2011) onward is 5×108. Hub bore is 63.4 mm throughout. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Focus?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Focus?
63.4 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.