ElpiAutoWheel fitment · Renault
Renault Captur — Bolt Pattern
The original J87 Captur (2013–2020) is 4×100 on a 60.1 mm hub. Both the HA Global and the European JB/JE generations (2019 on, both CMF-B platform) moved to a completely different 5×114.3 pattern on a 66.1 mm hub — the same PCD as the Nissan Qashqai/Juke that share the platform.
✓ Reviewed 2026-09-12
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Renault Captur is 5×114.3, 66.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Renault Captur have?
The original J87 Captur (2013–2020) is 4×100 on a 60.1 mm hub. Both the HA Global and the European JB/JE generations (2019 on, both CMF-B platform) moved to a completely different 5×114.3 pattern on a 66.1 mm hub — the same PCD as the Nissan Qashqai/Juke that share the platform. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Captur?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Captur?
66.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.