ElpiAutoWheel fitment · Kia
Kia Stinger — Bolt Pattern
Kia's rear-drive-based GT sedan (2018–2023) is 5×114.3 with a 67.1 mm hub and M12×1.5 bolts — the same pattern as most other modern Kias.
✓ Reviewed 2026-09-17
Wheel size OE 7J×19 ET24 · up to 8J×18 ET34 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Kia Stinger is 5×114.3, 67.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Kia Stinger have?
Kia's rear-drive-based GT sedan (2018–2023) is 5×114.3 with a 67.1 mm hub and M12×1.5 bolts — the same pattern as most other modern Kias. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Stinger?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Stinger?
67.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.