ElpiAutoWheel fitment · Kia
Kia Carnival — Bolt Pattern
Kia's minivan (badged Sedona in some markets) has run an unusually stable 5×114.3/67.1mm/M12×1.5 fitment since 1999 across four generations. A minority of 2006-2014 second-generation trims used a different heavy-duty 6×139.7/92.2mm fitment.
✓ Reviewed 2026-09-13
some 2006-2014 (2nd-gen) trims use 6x139.7/92.2mm instead — check the specific trim
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Kia Carnival is 5×114.3, 67.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Kia Carnival have?
Kia's minivan (badged Sedona in some markets) has run an unusually stable 5×114.3/67.1mm/M12×1.5 fitment since 1999 across four generations. A minority of 2006-2014 second-generation trims used a different heavy-duty 6×139.7/92.2mm fitment. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Carnival?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Carnival?
67.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.