ElpiAutoWheel fitment · Jeep
Jeep Wrangler — Bolt Pattern
The YJ and TJ are 5×114.3. The JK (2007) moved to 5×127 with an inch-thread (1/2"-20) stud, and the JL (2018) kept the same 5×127 pattern but switched to a metric M14×1.5 stud — same bolt circle, different lug nuts.
✓ Reviewed 2026-09-18
Same bolt circle as the JL, but the stud is inch-thread — JK and JL lug nuts are not interchangeable.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Jeep Wrangler is 5×127, 71.5 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Jeep Wrangler have?
The YJ and TJ are 5×114.3. The JK (2007) moved to 5×127 with an inch-thread (1/2"-20) stud, and the JL (2018) kept the same 5×127 pattern but switched to a metric M14×1.5 stud — same bolt circle, different lug nuts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Wrangler?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Wrangler?
71.5 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.