ElpiAutoWheel fitment · Jeep
Jeep Grand Cherokee — Bolt Pattern
The original ZJ (1992–1998) is 5×114.3 with imperial 1/2"-20 UNF studs on a 71.6 mm hub. Every Grand Cherokee from the WJ (1999) on — through today's WL — is 5×127 on the same hub, matching the Wrangler's fitment, with metric M14×1.5 studs.
✓ Reviewed 2026-09-12
Wheel size OE 6.5J×14 ET20 · up to 7J×15 ET35 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Jeep Grand Cherokee is 5×127, 71.6 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Jeep Grand Cherokee have?
The original ZJ (1992–1998) is 5×114.3 with imperial 1/2"-20 UNF studs on a 71.6 mm hub. Every Grand Cherokee from the WJ (1999) on — through today's WL — is 5×127 on the same hub, matching the Wrangler's fitment, with metric M14×1.5 studs. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Grand Cherokee?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Grand Cherokee?
71.6 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.