ElpiAutoWheel fitment · Jeep
Jeep Cherokee — Bolt Pattern
The body-on-frame/rugged-unibody Cherokee generations through the KK (1984-2013) used 5×114.3 on a 71.6 mm hub with imperial 1/2"-20 UNF studs; the unibody KL (2014-2024, sharing its small-wide platform with the Chrysler 200) switched to a smaller 5×110/65.1mm fitment with metric M12×1.25 — and to bolts instead of studs.
✓ Reviewed 2026-09-13
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Jeep Cherokee is 5×110, 65.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Jeep Cherokee have?
The body-on-frame/rugged-unibody Cherokee generations through the KK (1984-2013) used 5×114.3 on a 71.6 mm hub with imperial 1/2"-20 UNF studs; the unibody KL (2014-2024, sharing its small-wide platform with the Chrysler 200) switched to a smaller 5×110/65.1mm fitment with metric M12×1.25 — and to bolts instead of studs. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Cherokee?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Cherokee?
65.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.