ElpiAutoWheel fitment · Hyundai
Hyundai Accent — Bolt Pattern
The original X3 Accent (1994–1999) is 4×114.3 on a 67.1 mm hub, offset ET35–46. Every Accent from the LC (1999) on — through today's HC — has been 4×100 on a smaller 54.1 mm hub with M12×1.5 nuts, the small-Hyundai city-car fitment; offset crept up from ET35–46 on the LC to ET46–52 on the current HC.
✓ Reviewed 2026-09-18
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Hyundai Accent is 4×100, 54.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Hyundai Accent have?
The original X3 Accent (1994–1999) is 4×114.3 on a 67.1 mm hub, offset ET35–46. Every Accent from the LC (1999) on — through today's HC — has been 4×100 on a smaller 54.1 mm hub with M12×1.5 nuts, the small-Hyundai city-car fitment; offset crept up from ET35–46 on the LC to ET46–52 on the current HC. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Accent?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Accent?
54.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.