ElpiAutoWheel fitment · Hyundai
Hyundai Tucson — Bolt Pattern
Every Tucson generation (2004 on) is 5×114.3 with a 67.1 mm hub and M12×1.5 conical nuts — the same standard modern Hyundai/Kia fitment as the Elantra.
✓ Reviewed 2026-09-12
Wheel size OE 6.5Jx16 ET40 up to 7.5Jx19 ET48
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Hyundai Tucson is 5×114.3, 67.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Hyundai Tucson have?
Every Tucson generation (2004 on) is 5×114.3 with a 67.1 mm hub and M12×1.5 conical nuts — the same standard modern Hyundai/Kia fitment as the Elantra. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Tucson?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Tucson?
67.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.