ElpiAutoWheel fitment · Jeep
Jeep Compass — Bolt Pattern
The first-generation Compass (MK, 2006-2017) used 5×114.3 on a 67.1 mm hub with M12×1.5 nuts; the second generation (MP, 2017 on, small-wide FCA platform shared with the Renegade) moved to 5×110 on a 65.1 mm hub with M12×1.25 bolts.
✓ Reviewed 2026-09-13
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Jeep Compass is 5×110, 65.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Jeep Compass have?
The first-generation Compass (MK, 2006-2017) used 5×114.3 on a 67.1 mm hub with M12×1.5 nuts; the second generation (MP, 2017 on, small-wide FCA platform shared with the Renegade) moved to 5×110 on a 65.1 mm hub with M12×1.25 bolts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Compass?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Compass?
65.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.