ElpiAutoWheel fitment · Hyundai
Hyundai Sonata — Bolt Pattern
The 67.1 mm hub and M12×1.5 thread have stayed constant across every Sonata generation; base/entry trims through the LF (2015-2019) split 4×114.3 vs 5×114.3 by engine, while the current DN8 (2019 on) is 5×114.3 across the board.
✓ Reviewed 2026-09-13
Wheel size OE 6.5J×15 ET49 · up to 8.5J×19 ET60 (US-spec, wide across generations)
some 2004-2019 four-cylinder base trims used 4x114.3 instead — check the exact modification.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Hyundai Sonata is 5×114.3, 67.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Hyundai Sonata have?
The 67.1 mm hub and M12×1.5 thread have stayed constant across every Sonata generation; base/entry trims through the LF (2015-2019) split 4×114.3 vs 5×114.3 by engine, while the current DN8 (2019 on) is 5×114.3 across the board. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Sonata?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Sonata?
67.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.