ElpiAutoWheel fitment · Nissan
Nissan Juke — Bolt Pattern
Both generations of the Juke are 5×114.3 with a 66.1 mm hub, but the thread got coarser when the platform changed: F15 (2010–2019, the old Nissan B-platform) uses M12×1.25, while F16 (2019 on, the Renault-Nissan CMF-B platform) uses M12×1.5.
✓ Reviewed 2026-09-12
Wheel size OE 6.5Jx16 ET38
F15 and F16 share the same PCD and hub bore but different thread pitch — F15 wheel bolts will not thread onto an F16 hub.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Nissan Juke is 5×114.3, 66.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Nissan Juke have?
Both generations of the Juke are 5×114.3 with a 66.1 mm hub, but the thread got coarser when the platform changed: F15 (2010–2019, the old Nissan B-platform) uses M12×1.25, while F16 (2019 on, the Renault-Nissan CMF-B platform) uses M12×1.5. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Juke?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Juke?
66.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.