ElpiAutoWheel fitment · Opel
O Opel Mokka — Bolt Pattern
The first Mokka/Mokka X (2012–2020, GM Delta II platform) is 5×105 with a 56.6 mm hub and M12×1.5 bolts. After PSA took over Opel, the all-new 2020+ Mokka switched to the Peugeot/Citroën CMP platform's 4×108, 65.1 mm hub and M12×1.25 bolts — a completely different fitment, so never mix wheels between generations.
✓ Reviewed 2026-09-17
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Opel Mokka is 4×108, 65.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Opel Mokka have?
The first Mokka/Mokka X (2012–2020, GM Delta II platform) is 5×105 with a 56.6 mm hub and M12×1.5 bolts. After PSA took over Opel, the all-new 2020+ Mokka switched to the Peugeot/Citroën CMP platform's 4×108, 65.1 mm hub and M12×1.25 bolts — a completely different fitment, so never mix wheels between generations. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Mokka?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Mokka?
65.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.