ElpiAuto4x108 Bolt Pattern
4 studs on a 108 mm circle — also written 4×4.25″. Used by 12 models in our database.
Vehicles with this pattern
Specs for 4x108
| Thread | M12x1.5 or M12x1.25 or 1/2"-20 UNF |
|---|---|
| Centre bore seen on these cars | 63.4–65.1 mm |
Every 4x108 generation in our database uses cone-seat bolts.
Centre bore varies by model even within the same 4x108 pattern — use a hub-centric ring rather than assuming a universal fit.
Does NOT interchange with
Common questions
What does 4x108 mean?
4 studs, on a circle 108 mm in diameter — that circle is the pitch circle diameter (PCD). 4x108 is also written 4×4.25″.
What fits a 4x108 hub?
Only another 4x108 wheel. Bolt pattern has no working tolerance — even a pattern a couple of millimetres off will not seat properly. A different pattern needs a proper bolt-on adapter, not a "close enough" wheel.