ElpiAuto

Wheel fitment · Opel

O Opel Corsa — Bolt Pattern

Every Corsa from the B through the E (1993–2019) is 4×100 with a 56.6 mm hub and M12×1.5 nuts. The current F (2019 on, PSA platform shared with the Peugeot 208) switched to 4×108 on a 65.1 mm hub with bolts instead of nuts.

✓ Reviewed 2026-09-12

B–E1993–2019
Bolt pattern4x100Centre bore (DIA)56.6 mmThreadM12x1.5

Wheel size OE 5.5Jx14 ET39 up to 7Jx17 ET44

F2019–now
Bolt pattern4x108Centre bore (DIA)65.1 mmThreadM12x1.25

Wheel size OE 6.5Jx16 ET38

Stellantis CMP platform, shared with the Peugeot 208 — bolts, not nuts.

Trims and markets vary — verify against your own wheel or the owner's handbook before buying.

Will a wheel fit?

This Opel Corsa is 4×108, 65.1 mm hub.

The wheel you are checking
×

Don't know the wheel's own pattern? Measure it →

Loading…
Useful? Share it with someone who's picking tires or wheels.

More tire calculators

Tire Size CalculatorDecode one size, see what else fits the wheelTire Size ComparisonTwo sizes side by side, with the speedometer effectTire Size ConverterWrite any size in metric or inch notationWheel Offset CalculatorPoke, strut clearance and backspacing for a new wheelTire Pressure Converterpsi, kPa and bar — with a placard chartFuel Cost CalculatorTrip cost and consumption in mpg, L/100km, km/LSpeedometer Error CalculatorHow far off the dial reads after a tire size changeTire Stretch CalculatorHow stretched a tire sits on a given wheel width

Common questions

What bolt pattern does the Opel Corsa have?

Every Corsa from the B through the E (1993–2019) is 4×100 with a 56.6 mm hub and M12×1.5 nuts. The current F (2019 on, PSA platform shared with the Peugeot 208) switched to 4×108 on a 65.1 mm hub with bolts instead of nuts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.

Will other wheels fit my Corsa?

Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.

What is the centre bore on a Corsa?

65.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.

Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.