ElpiAutoWheel fitment · Honda
Honda Accord — Bolt Pattern
The 5th-generation Accord (1994–97) is 4×114.3. From 1998 on, almost every market moved to 5×114.3 — a handful of early-1998 cars carried the old 4-lug over — and it has stayed 5×114.3 on the same 64.1 mm hub ever since.
✓ Reviewed 2026-09-12
Wheel size OE 5Jx14 ET40 up to 7.5Jx17 ET65
A few early-1998 cars (some Euro/JDM markets) still shipped on the old 4×114.3 pattern before the changeover completed.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Honda Accord is 5×114.3, 64.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Honda Accord have?
The 5th-generation Accord (1994–97) is 4×114.3. From 1998 on, almost every market moved to 5×114.3 — a handful of early-1998 cars carried the old 4-lug over — and it has stayed 5×114.3 on the same 64.1 mm hub ever since. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Accord?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Accord?
64.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.