ElpiAutoWheel fitment · Toyota
Toyota Corolla — Bolt Pattern
The mainstream Corolla sedan and hatch has been 5×100 with a 54.1 mm hub since 2003 (E120 onward). Only the derivatives differ: the GR Corolla and Corolla Cross are 5×114.3 with a 60.1 mm hub.
✓ Reviewed 2026-09-22
Wheel size OE 5.5J×14 ET45 (US-spec, limited data)
Wheel size OE 6J×15 ET33 · up to 8J×18 ET40 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Toyota Corolla is 5×100, 54.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Toyota Corolla have?
The mainstream Corolla sedan and hatch has been 5×100 with a 54.1 mm hub since 2003 (E120 onward). Only the derivatives differ: the GR Corolla and Corolla Cross are 5×114.3 with a 60.1 mm hub. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Corolla?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Corolla?
54.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.