ElpiAutoWheel fitment · Kia
Kia Picanto — Bolt Pattern
Every Picanto generation since 2004 is 4×100 with a 54.1 mm hub and M12×1.5 conical nuts — the standard small-Hyundai/Kia city-car fitment, unchanged for two decades.
✓ Reviewed 2026-09-12
Wheel size OE 5Jx14 ET46 up to 6Jx16 ET46
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Kia Picanto is 4×100, 54.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Kia Picanto have?
Every Picanto generation since 2004 is 4×100 with a 54.1 mm hub and M12×1.5 conical nuts — the standard small-Hyundai/Kia city-car fitment, unchanged for two decades. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Picanto?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Picanto?
54.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.