ElpiAutoWheel fitment · Daewoo
Daewoo Lanos — Bolt Pattern
The Lanos (T100/150), 1997–2008, is 4×100 with a 56.6 mm hub and M12×1.5 conical-seat bolts across every engine variant.
✓ Reviewed 2026-09-11
Wheel size OE 5–5.5J×13–14 ET49 · acceptable up to 7J×16 ET42
OE wheel size varies slightly by engine — 1.3i/1.5i ship on 13", 1.6i on 14" — but bolt pattern, bore and thread are the same across every variant.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Daewoo Lanos is 4×100, 56.6 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Daewoo Lanos have?
The Lanos (T100/150), 1997–2008, is 4×100 with a 56.6 mm hub and M12×1.5 conical-seat bolts across every engine variant. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Lanos?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Lanos?
56.6 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.