ElpiAutoWheel fitment · Kia
Kia Rio — Bolt Pattern
Every Rio generation since 2000 — DC, JB, UB and YB — has kept the same 4×100, 54.1 mm hub and M12×1.5 conical bolts. Only the OE wheel size has grown, from 13" to 17".
✓ Reviewed 2026-09-11
Wheel size OE 5–5.5J×13 ET40 · acceptable up to 5.5J×14 ET40
Wheel size OE 5J×14 ET39 · acceptable up to 6.5J×16 ET46
Wheel size OE 5.5–6.5J×15–17 ET36–52 (varies by trim)
Wheel size OE 6J×15 ET46 · acceptable up to 6.5J×17 ET49
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Kia Rio is 4×100, 54.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Kia Rio have?
Every Rio generation since 2000 — DC, JB, UB and YB — has kept the same 4×100, 54.1 mm hub and M12×1.5 conical bolts. Only the OE wheel size has grown, from 13" to 17". Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Rio?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Rio?
54.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.