ElpiAutoWheel fitment · Mercedes-Benz
Mercedes-Benz E-Class — Bolt Pattern
Every E-Class from the W124 onward is 5×112 on a 66.6 mm hub — the pattern hasn't budged, but the nut thread has: W124 and W210 (up to 2002) use M12×1.5, while the W211 and every generation since use M14×1.5.
✓ Reviewed 2026-09-12
Wheel size OE 6.5Jx15 ET44 up to 7.5Jx17 ET42
Wheel size OE 7.5Jx17 ET30 up to 8.5Jx21 ET35.5
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Mercedes-Benz E-Class is 5×112, 66.6 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Mercedes-Benz E-Class have?
Every E-Class from the W124 onward is 5×112 on a 66.6 mm hub — the pattern hasn't budged, but the nut thread has: W124 and W210 (up to 2002) use M12×1.5, while the W211 and every generation since use M14×1.5. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my E-Class?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a E-Class?
66.6 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.