ElpiAutoWheel fitment · Mercedes-Benz
Mercedes-Benz A-Class — Bolt Pattern
Same story as the E-Class: every A-Class since 1997 is 5×112 on a 66.6 mm hub. The original W168/W169 use M12×1.5 nuts; the W176 (2013) and every generation since moved to M14×1.5.
✓ Reviewed 2026-09-12
Wheel size OE 5Jx15 ET44 up to 7Jx17 ET57
Wheel size OE 6.5Jx16 ET44 up to 7.5Jx19 ET49
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Mercedes-Benz A-Class is 5×112, 66.6 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Mercedes-Benz A-Class have?
Same story as the E-Class: every A-Class since 1997 is 5×112 on a 66.6 mm hub. The original W168/W169 use M12×1.5 nuts; the W176 (2013) and every generation since moved to M14×1.5. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my A-Class?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a A-Class?
66.6 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.