ElpiAutoWheel fitment · Mazda
Mazda 3 — Bolt Pattern
Every Mazda 3, 2004 to now, is 5×114.3 with a 67.1 mm hub and M12×1.5 conical nuts.
✓ Reviewed 2026-09-11
Wheel size OE 6J×15 ET52 · up to 8J×18 ET55 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Mazda 3 is 5×114.3, 67.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Mazda 3 have?
Every Mazda 3, 2004 to now, is 5×114.3 with a 67.1 mm hub and M12×1.5 conical nuts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my 3?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a 3?
67.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.