ElpiAutoWheel fitment · Audi
Audi Q7 — Bolt Pattern
The original 4L (2005–2015) is 5×130 with a large 71.6 mm hub — shared with the Porsche Cayenne/VW Touareg of that era. The 4M (2015 on) switched to the regular Audi 5×112 with a 66.5 mm hub, and the offset dropped sharply too, from the 4L's ET56–65 to the 4M's ET25–38.
✓ Reviewed 2026-09-22
Wheel size OE 7.5J×18 ET56 · up to 8.5J×20 ET65 (US-spec)
Wheel size OE 8J×18 ET25 · up to 9.5J×18 ET38 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Audi Q7 is 5×112, 66.5 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Audi Q7 have?
The original 4L (2005–2015) is 5×130 with a large 71.6 mm hub — shared with the Porsche Cayenne/VW Touareg of that era. The 4M (2015 on) switched to the regular Audi 5×112 with a 66.5 mm hub, and the offset dropped sharply too, from the 4L's ET56–65 to the 4M's ET25–38. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Q7?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Q7?
66.5 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.