ElpiAutoWheel fitment · Porsche
P Porsche Cayenne — Bolt Pattern
The Cayenne shares Porsche's signature 5×130/71.6mm pattern with the 911 and Panamera, unchanged across all three generations since its 2002 launch (its VW Touareg/Audi Q7 platform-mates of the same era used the same pattern too).
✓ Reviewed 2026-09-13
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Porsche Cayenne is 5×130, 71.6 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Porsche Cayenne have?
The Cayenne shares Porsche's signature 5×130/71.6mm pattern with the 911 and Panamera, unchanged across all three generations since its 2002 launch (its VW Touareg/Audi Q7 platform-mates of the same era used the same pattern too). Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Cayenne?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Cayenne?
71.6 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.