ElpiAutoWheel fitment · Volkswagen
Volkswagen T-Roc — Bolt Pattern
The T-Roc has kept a single 5×112/57.1mm fitment with ball-seat M14×1.5 bolts across its whole life, 2017 through the current facelift.
✓ Reviewed 2026-09-13
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Volkswagen T-Roc is 5×112, 57.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Volkswagen T-Roc have?
The T-Roc has kept a single 5×112/57.1mm fitment with ball-seat M14×1.5 bolts across its whole life, 2017 through the current facelift. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my T-Roc?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a T-Roc?
57.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.