ElpiAutoWheel fitment · Volkswagen
Volkswagen Atlas — Bolt Pattern
VW's North American three-row SUV uses the standard modern VW Group fitment: 5×112 on a 57.1 mm hub with M14×1.5 ball-seat bolts, unchanged since launch. Offset stays a flat ET34 across every OE wheel size, 18 to 21 inches.
✓ Reviewed 2026-09-22
Wheel size OE 8J×18 ET34 · up to 9J×21 ET34 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Volkswagen Atlas is 5×112, 57.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Volkswagen Atlas have?
VW's North American three-row SUV uses the standard modern VW Group fitment: 5×112 on a 57.1 mm hub with M14×1.5 ball-seat bolts, unchanged since launch. Offset stays a flat ET34 across every OE wheel size, 18 to 21 inches. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Atlas?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Atlas?
57.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.