ElpiAutoWheel fitment · Audi
Audi Q3 — Bolt Pattern
Every Q3 generation, 2011 to now, is 5×112 with a 57.1 mm hub and M14×1.5 wheel bolts — the standard VW Group fitment, same as the A3/A4 it shares its platform lineage with.
✓ Reviewed 2026-09-12
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Audi Q3 is 5×112, 57.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Audi Q3 have?
Every Q3 generation, 2011 to now, is 5×112 with a 57.1 mm hub and M14×1.5 wheel bolts — the standard VW Group fitment, same as the A3/A4 it shares its platform lineage with. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Q3?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Q3?
57.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.