ElpiAutoWheel fitment · Land Rover
L Land Rover Range Rover — Bolt Pattern
Every Range Rover from the P38A (1994) on is 5×120 with M14×1.5 nuts. The hub grew slightly along the way — 70.1 mm on the P38A and L322, 72.6 mm from the L405 (2012) onward.
✓ Reviewed 2026-09-12
Wheel size OE 8Jx16 ET57 up to 9Jx20 ET50
Wheel size OE 8.5Jx20 ET47 up to 9.5Jx22 ET49
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Land Rover Range Rover is 5×120, 72.6 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Land Rover Range Rover have?
Every Range Rover from the P38A (1994) on is 5×120 with M14×1.5 nuts. The hub grew slightly along the way — 70.1 mm on the P38A and L322, 72.6 mm from the L405 (2012) onward. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Range Rover?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Range Rover?
72.6 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.