ElpiAutoWheel fitment · Honda
Honda Pilot — Bolt Pattern
The first-generation Pilot (2003-2008) used 5×114.3 bolts; every generation since (2008 on) switched to a wider 5×120 pattern, with the hub staying 64.1 mm and the thread going M12×1.5 to M14×1.5 at the same changeover.
✓ Reviewed 2026-09-22
Wheel size OE 6.5J×16 ET45 (US-spec, limited data)
Wheel size OE 7.5J×17 ET45 · up to 8J×20 ET55 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Honda Pilot is 5×120, 64.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Honda Pilot have?
The first-generation Pilot (2003-2008) used 5×114.3 bolts; every generation since (2008 on) switched to a wider 5×120 pattern, with the hub staying 64.1 mm and the thread going M12×1.5 to M14×1.5 at the same changeover. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Pilot?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Pilot?
64.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.