ElpiAutoWheel fitment · Ram
Ram 1500 — Bolt Pattern
The DS-body 1500 (2009–2018, and the Classic built alongside the new truck through 2024) is 5×139.7 — 9/16"-18 stud through 2011, M14×1.5 from 2012. The all-new DT body (2019+) moved to 6×139.7 with a 77.8 mm hub and M14×1.5 studs.
✓ Reviewed 2026-09-18
"Classic" is the old DS body continued alongside the new DT truck through 2024 — check which body style you actually have.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Ram 1500 is 6×139.7, 77.8 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Ram 1500 have?
The DS-body 1500 (2009–2018, and the Classic built alongside the new truck through 2024) is 5×139.7 — 9/16"-18 stud through 2011, M14×1.5 from 2012. The all-new DT body (2019+) moved to 6×139.7 with a 77.8 mm hub and M14×1.5 studs. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my 1500?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a 1500?
77.8 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.