ElpiAutoWheel fitment · Nissan
Nissan Rogue — Bolt Pattern
Every Rogue generation from 2008 to today has kept the same 5×114.3 bolt pattern, 66.1 mm hub, and M12×1.25 lug nuts.
✓ Reviewed 2026-09-13
Wheel size OE 6.5J×16 ET40 · up to 7.5J×19 ET40 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Nissan Rogue is 5×114.3, 66.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Nissan Rogue have?
Every Rogue generation from 2008 to today has kept the same 5×114.3 bolt pattern, 66.1 mm hub, and M12×1.25 lug nuts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Rogue?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Rogue?
66.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.