ElpiAutoWheel fitment · Nissan
Nissan Pathfinder — Bolt Pattern
The truck-frame R51 (2005–2014) is 6×114.3. The unibody R52 (2013–2020) and current R53 both moved to 5×114.3 on a 66.1 mm hub with M12×1.25 bolts.
✓ Reviewed 2026-09-17
Wheel size OE 7.5J×18 ET50 · up to 7.5J×20 ET50 (US-spec)
Current R53 hub bore not independently re-confirmed by us — check your wheel stamp.
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Nissan Pathfinder is 5×114.3, 66.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Nissan Pathfinder have?
The truck-frame R51 (2005–2014) is 6×114.3. The unibody R52 (2013–2020) and current R53 both moved to 5×114.3 on a 66.1 mm hub with M12×1.25 bolts. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Pathfinder?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Pathfinder?
66.1 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.